Army Body Composition Program
Army height and weight standards: maximum waist by height
The Army no longer screens Soldiers against a height and weight table. Since July 1, 2026, Army Directive 2026-13 makes the waist-to-height ratio the only body composition standard: your waist at the navel divided by your height must be below 0.55, the same for men and women of every age. Check your measurements below, or find your height in the Army's table of the largest waist that meets it.
Army Directive 2026-13 in effect since · checked
To meet the Army standard
- Under 0.550 waist-to-height ratio (WHtR), waist divided by height
- 3 waist readings at the navel, averaged; height in socks
- One line for men and women of every age

Check your measurements
Your waist-to-height ratio
—
Not checked yet
Enter your height and waist to see your ratio and whether it is under 0.550.
Not an official result. Your unit measures you and records the WHtR on DA Form 5500.
Maximum waist by height
| Heightinches | Heightfeet and inches | Maximum waistinches | WHtRat that waist |
|---|---|---|---|
| 48 | 4 ft 0 in | 26 | 0.541 |
| 48.5 | 4 ft 0.5 in | 26.5 | 0.546 |
| 49 | 4 ft 1 in | 26.5 | 0.540 |
| 49.5 | 4 ft 1.5 in | 27 | 0.545 |
| 50 | 4 ft 2 in | 27 | 0.540 |
| 50.5 | 4 ft 2.5 in | 27.5 | 0.544 |
| 51 | 4 ft 3 in | 28 | 0.549 |
| 51.5 | 4 ft 3.5 in | 28 | 0.543 |
| 52 | 4 ft 4 in | 28.5 | 0.548 |
| 52.5 | 4 ft 4.5 in | 28.5 | 0.542 |
| 53 | 4 ft 5 in | 29 | 0.547 |
| 53.5 | 4 ft 5.5 in | 29 | 0.542 |
| 54 | 4 ft 6 in | 29.5 | 0.546 |
| 54.5 | 4 ft 6.5 in | 29.5 | 0.541 |
| 55 | 4 ft 7 in | 30 | 0.545 |
| 55.5 | 4 ft 7.5 in | 30.5 | 0.549 |
| 56 | 4 ft 8 in | 30.5 | 0.544 |
| 56.5 | 4 ft 8.5 in | 31 | 0.548 |
| 57 | 4 ft 9 in | 31 | 0.543 |
| 57.5 | 4 ft 9.5 in | 31.5 | 0.547 |
| 58 | 4 ft 10 in | 31.5 | 0.543 |
| 58.5 | 4 ft 10.5 in | 32 | 0.547 |
| 59 | 4 ft 11 in | 32 | 0.542 |
| 59.5 | 4 ft 11.5 in | 32.5 | 0.546 |
| 60 | 5 ft 0 in | 32.5 | 0.541 |
| 60.5 | 5 ft 0.5 in | 33 | 0.545 |
| 61 | 5 ft 1 in | 33.5 | 0.549 |
| 61.5 | 5 ft 1.5 in | 33.5 | 0.544 |
| 62 | 5 ft 2 in | 34 | 0.548 |
| 62.5 | 5 ft 2.5 in | 34 | 0.544 |
| 63 | 5 ft 3 in | 34.5 | 0.547 |
| 63.5 | 5 ft 3.5 in | 34.5 | 0.543 |
| 64 | 5 ft 4 in | 35 | 0.546 |
| 64.5 | 5 ft 4.5 in | 35 | 0.542 |
| 65 | 5 ft 5 in | 35.5 | 0.546 |
| 65.5 | 5 ft 5.5 in | 36 | 0.549 |
| 66 | 5 ft 6 in | 36 | 0.545 |
| 66.5 | 5 ft 6.5 in | 36.5 | 0.548 |
| 67 | 5 ft 7 in | 36.5 | 0.544 |
| 67.5 | 5 ft 7.5 in | 37 | 0.548 |
| 68 | 5 ft 8 in | 37 | 0.544 |
| 68.5 | 5 ft 8.5 in | 37.5 | 0.547 |
| 69 | 5 ft 9 in | 37.5 | 0.543 |
| 69.5 | 5 ft 9.5 in | 38 | 0.546 |
| 70 | 5 ft 10 in | 38 | 0.542 |
| 70.5 | 5 ft 10.5 in | 38.5 | 0.546 |
| 71 | 5 ft 11 in | 39 | 0.549 |
| 71.5 | 5 ft 11.5 in | 39 | 0.545 |
| 72 | 6 ft 0 in | 39.5 | 0.548 |
| 72.5 | 6 ft 0.5 in | 39.5 | 0.544 |
| 73 | 6 ft 1 in | 40 | 0.547 |
| 73.5 | 6 ft 1.5 in | 40 | 0.544 |
| 74 | 6 ft 2 in | 40.5 | 0.547 |
| 74.5 | 6 ft 2.5 in | 40.5 | 0.543 |
| 75 | 6 ft 3 in | 41 | 0.546 |
| 75.5 | 6 ft 3.5 in | 41.5 | 0.549 |
| 76 | 6 ft 4 in | 41.5 | 0.546 |
| 76.5 | 6 ft 4.5 in | 42 | 0.549 |
| 77 | 6 ft 5 in | 42 | 0.545 |
| 77.5 | 6 ft 5.5 in | 42.5 | 0.548 |
| 78 | 6 ft 6 in | 42.5 | 0.544 |
| 78.5 | 6 ft 6.5 in | 43 | 0.547 |
| 79 | 6 ft 7 in | 43 | 0.544 |
| 79.5 | 6 ft 7.5 in | 43.5 | 0.547 |
| 80 | 6 ft 8 in | 43.5 | 0.543 |
| 80.5 | 6 ft 8.5 in | 44 | 0.546 |
| 81 | 6 ft 9 in | 44.5 | 0.549 |
| 81.5 | 6 ft 9.5 in | 44.5 | 0.546 |
| 82 | 6 ft 10 in | 45 | 0.548 |
| 82.5 | 6 ft 10.5 in | 45 | 0.545 |
| 83 | 6 ft 11 in | 45.5 | 0.548 |
| 83.5 | 6 ft 11.5 in | 45.5 | 0.544 |
Your height is rounded to the nearest half inch. If it falls exactly between two rows, for example 68¼ inches, the Army annex does not say which way it goes, so check both rows.
If the average of your three readings is above your row’s maximum by less than half an inch (for example 32.5, 33 and 33 inches at 60 inches tall), Army documents round that average differently and give different results. The official result is the one recorded on DA Form 5500 after the same-day confirmation measurement.
The table is Figure B-1 of Annex A to EXORD 182-26, the Army’s guidance on measuring the waist-to-height ratio. For every height from 48 to 83.5 inches it gives the largest waist, in half inches, that keeps the ratio under 0.55, and the ratio that waist gives. The same rows apply to men and women of every age, and each row has its own link: a 6-foot Soldier’s row is 72 inches. Figure B-1 prints four decimals in three rows, 64.5, 65 and 65.5 inches; the table here shows three in every row, cut rather than rounded, as the annex records a ratio.
How to read the table
Each row assumes the measuring steps in Annex A and on DA Form 5500, the worksheet the ratio is recorded on:
- Height. Measured in socks, standing straight with the head level, and rounded to the nearest half inch.
- Waist. Measured three times at the navel with a non-stretch tape parallel to the floor. Each reading is rounded down to the half inch.
- Average. The three readings are averaged. If one differs by more than an inch from the other two, a fourth is taken and the three closest are averaged.
- Ratio. The average is divided by height and recorded to three decimals. Later digits are dropped, not rounded: 0.549888 is recorded as 0.549.
- Line. A ratio of 0.549 or lower meets the standard; 0.550 or higher does not.
Example at 70 inches: the row’s maximum is 38 inches. An average of 38 inches gives 38 ÷ 70 = 0.542, which meets the standard. An average of 38.5 inches gives 0.550, which does not.
Dropping digits instead of rounding matters at a few heights. At 65.5 inches, the row’s 36-inch waist gives 0.5496. Rounded, that would read 0.550 and miss the line; recorded as the annex requires, it is 0.549 and meets the standard. The check at the top of this page applies these steps to your own readings and links to your row.
The rule since July 1, 2026
Army Directive 2026-13, Army Body Composition Program and Standards, is dated July 1, 2026 and took effect immediately; the Army announced it on July 7. It makes the waist-to-height ratio the only measurement in the Army Body Composition Program (ABCP) and discontinues the height and weight screening tables. It applies to the Regular Army, the Army National Guard and the Army Reserve, and to cadets of the U.S. Military Academy and Senior ROTC.
- How often. At least twice per calendar year, and whenever a commander orders it.
- Timing. At least 7 days after an AFT or Combat Field Test, unless urgent operational needs require otherwise.
- Confirmation. If the first measurement does not meet the standard, a different team measures again on the same duty day, before the commander takes any action.
- Result. A ratio of 0.55 or more means a flag and enrollment in the ABCP. Regular Army and Active Guard Reserve Soldiers then get a medical exam to rule out a medical cause; Guard and Reserve Soldiers may request one, at their own expense when not on active duty.
- Leaving the program. Monthly assessments are rescinded. A Soldier is removed from the program as soon as a measurement meets the standard.
- Record. The ratio goes on DA Form 5500 and into the Army Training Information System (ATIS). DA Form 5501 is rescinded.
No AFT score exempts a Soldier. The directive rescinds Army Directive 2025-17, which had exempted Soldiers scoring 465 or more on the AFT. The test itself is on the AFT standards page, and the AFT calculator scores it; neither changes the rule here.
What happened to the height and weight table
Under AR 600-9, The Army Body Composition Program (July 16, 2019), the requirement was a body fat limit by age and sex, estimated with a tape at the neck and abdomen for men and the neck, waist and hips for women. The weight-for-height table, Table B-1, was a shortcut commanders could use: a Soldier who did not exceed the screening weight for age and height needed no tape, and a Soldier above it was taped. For the table, height was rounded to the nearest whole inch, half an inch going up.
Army Directive 2026-13 ended this on July 1, 2026. Paragraph 5a discontinues the height and weight screening tables, and paragraph 5a(1) allows no tape test or other body fat assessment to challenge the ratio. The directive also rescinds Army Directives 2023-11 and 2023-08, the earlier changes to body fat assessment.
Weight no longer enters any Army body composition decision for Soldiers. The old table is kept below, closed, for reading older records. In it, the screening weight for a man aged 21 to 27 at 70 inches was 185 pounds; under the current rule that number decides nothing.
Discontinued: AR 600-9 weight-for-height table, no longer used for current ABCP screening
Historical only. Army Directive 2026-13 ended height and weight screening on July 1, 2026. These weights no longer decide anything: the Army standard today is the WHtR alone.
| Heightinches | Minimum weight | Men, by age | Women, by age | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Men, age 17–20 | Men, age 21–27 | Men, age 28–39 | Men, age 40+ | Women, age 17–20 | Women, age 21–27 | Women, age 28–39 | Women, age 40+ | ||
| 58 | 91 | — | — | — | — | 119 | 121 | 122 | 124 |
| 59 | 94 | — | — | — | — | 124 | 125 | 126 | 128 |
| 60 | 97 | 132 | 136 | 139 | 141 | 128 | 129 | 131 | 133 |
| 61 | 100 | 136 | 140 | 144 | 146 | 132 | 134 | 135 | 137 |
| 62 | 104 | 141 | 144 | 148 | 150 | 136 | 138 | 140 | 142 |
| 63 | 107 | 145 | 149 | 153 | 155 | 141 | 143 | 144 | 146 |
| 64 | 110 | 150 | 154 | 158 | 160 | 145 | 147 | 149 | 151 |
| 65 | 114 | 155 | 159 | 163 | 165 | 150 | 152 | 154 | 156 |
| 66 | 117 | 160 | 163 | 168 | 170 | 155 | 156 | 158 | 161 |
| 67 | 121 | 165 | 169 | 174 | 176 | 159 | 161 | 163 | 166 |
| 68 | 125 | 170 | 174 | 179 | 181 | 164 | 166 | 168 | 171 |
| 69 | 128 | 175 | 179 | 184 | 186 | 169 | 171 | 173 | 176 |
| 70 | 132 | 180 | 185 | 189 | 192 | 174 | 176 | 178 | 181 |
| 71 | 136 | 185 | 189 | 194 | 197 | 179 | 181 | 183 | 186 |
| 72 | 140 | 190 | 195 | 200 | 203 | 184 | 186 | 188 | 191 |
| 73 | 144 | 195 | 200 | 205 | 208 | 189 | 191 | 194 | 197 |
| 74 | 148 | 201 | 206 | 211 | 214 | 194 | 197 | 199 | 202 |
| 75 | 152 | 206 | 212 | 217 | 220 | 200 | 202 | 204 | 208 |
| 76 | 156 | 212 | 217 | 223 | 226 | 205 | 207 | 210 | 213 |
| 77 | 160 | 218 | 223 | 229 | 232 | 210 | 213 | 215 | 219 |
| 78 | 164 | 223 | 229 | 235 | 238 | 216 | 218 | 221 | 225 |
| 79 | 168 | 229 | 235 | 241 | 244 | 221 | 224 | 227 | 230 |
| 80 | 173 | 234 | 240 | 247 | 250 | 227 | 230 | 233 | 236 |
- Male and female Soldiers who fall below the minimum weights shown in table B-1 will be referred by the commander for immediate medical evaluation.
- Add 6 pounds per inch for males over 80 inches and 5 pounds per inch for females over 80 inches.
Height for this table was rounded to the nearest whole inch, a half inch or more up (AR 600-9, para B-1a).
What AR 600-9 still covers
AR 600-9 has not been withdrawn. Enrollment, disenrollment, counseling and administrative actions in the ABCP still proceed under it, and flags follow AR 600-8-2. Where it conflicts with the directive, the directive controls, so its tables and tape method no longer apply. Paragraph 6 of the directive has the Army G-1 write the new rules into AR 600-9 and AR 600-8-2 within 2 years, that is by July 2028, and the directive ends when the revised regulations are published.
Standards for women
Women use the same table and the same line as men: a ratio below 0.55 at every age. The old system had women’s weight columns in Table B-1 and different tape sites; the ratio has neither.
Annex A sets out how Soldiers are measured. A trained Soldier of the same sex takes the measurement; if none is available, a Soldier of the opposite sex may measure while a same-sex Soldier observes. Soldiers wear socks and the Army PT trunks and T-shirt, without undergarments that bind the abdomen. Women may fold the T-shirt up and tuck it into the band of their bra, and removing the shirt is the Soldier’s choice.
The ABCP FAQ states that the existing medical exemptions for pregnant and postpartum Soldiers remain in effect. They are set out in AR 600-9.
Is there an age chart?
No. The ratio has one line for every age, so a 19-year-old and a 45-year-old of the same height have the same maximum waist. The old system had four age groups, 17–20, 21–27, 28–39 and 40 and older, in Tables B-1 and B-2 of AR 600-9, and the screening weight rose with each older group. Charts by age come from that discontinued system.
Body fat percentage and the tape test
The waist-to-height ratio is not a body fat percentage. It is one measurement divided by another, with no percent and no conversion to one, and the Army uses the ratio itself as the standard.
The tape test is gone. Paragraph 5a(1) of the directive allows no secondary method, such as the circumference-based tape test or another body fat assessment, to challenge the ratio, and the FAQ says all previous body fat methods are rescinded. A Soldier cannot ask to be taped instead. Body fat charts by age and sex, and tape calculators, describe the system that ended on July 1, 2026. The old equations and limits are kept, marked as history, on the Army body fat calculator page.
Body mass index (BMI) plays no part either: the ratio is the sole measurement. Other services use the ratio in their own ways. The Air Force scores it for points in its fitness assessment, and the Navy’s body composition assessment is a separate step from the Navy PRT.
What may still change
- The 180-day assessment. Units may start separation actions for a Soldier flagged for failing the ABCP, but no Soldier is separated until HQDA completes a 180-day assessment and issues further guidance. The FAQ says it will review the standard’s accuracy, fairness and effect on readiness. Neither document dates it.
- The regulations. AR 600-9 and AR 600-8-2 are due to be revised by July 2028. Until then, the directive and Annex A apply.
- The Department of War instruction. DoW Instruction 1308.03, effective August 31, 2026, came out after the directive. It also sets a ratio below 0.55, but measures the waist midway between the lowest rib and the top of the hip bone, rounds every measurement down to the half inch, and sends a ratio of 0.55 or more to a further assessment. The Army measures at the navel and allows no second method. We found no Army guidance reconciling the two; the table follows the Army annex.
- The worksheet. Two fillable versions of DA Form 5500, both dated July 2026, calculate the average differently, which is why the second note under the table exists.
Joining the Army
This page covers Soldiers and cadets. Directive 2026-13 says nothing about applicants. Standards for joining come from other documents, mainly AR 40-501, Standards of Medical Fitness, and AR 601-210, the enlistment regulation. The editions we checked, AR 40-501 as revised on September 29, 2025 and AR 601-210 of March 20, 2026, predate the directive and still describe weight tables, with estimated body composition deciding when an applicant is over the table weight.
As of September 2026, the Army’s recruiting site says recruits have their waist-to-height ratio measured at the Military Entrance Processing Station (MEPS) and that this replaced the height and weight requirements. We found no published document that sets the ratio or the procedure for applicants, so this page gives no numbers for joining: no weight, no waist and no ratio. If you are applying, confirm the current standard with your recruiter or at MEPS, and do not assume the Soldier table applies to you.
Sources
Checked October 25, 2026. The maximum waist values come from the second document below; the rules come from the others.
- Army Directive 2026-13, Army Body Composition Program and Standards (July 1, 2026), paragraphs 3, 5 and 6
- EXORD 182-26, Annex A, Implementing Guidance for Waist to Height Ratio Measurement Procedures for the ABCP (July 2026), paragraphs B-1 and B-2, Table B-1 and Figure B-1
- Army Body Composition Program and Standards, Frequently Asked Questions (effective July 7, 2026). It refers to the directive as Army Directive 2026-06; the directive is numbered 2026-13.
- DA Form 5500, Army Body Composition Screening and Assessment Worksheet (July 2026), printed steps 1 and 2
- AR 600-9, The Army Body Composition Program (July 16, 2019), paragraph 3-2, appendix B and Table B-1, for the discontinued table
- DoW Instruction 1308.03, DoW Physical Fitness/Body Composition Program (August 31, 2026), paragraph 3.2.g
- AR 40-501, Standards of Medical Fitness (June 27, 2019, revised September 29, 2025), paragraph 2-3, for applicants
- AR 601-210, Regular Army and Reserve Components Enlistment Program (March 20, 2026), paragraphs 2-9 and 3-7, for applicants
The statement about MEPS comes from the recruiting site’s page on the processing station, read in its version of September 30, 2026; it is not a regulation. How this site turns official tables into its own is described in how we score.
Questions
Does the Army still use height and weight tables?
No. Since July 1, 2026, Army Directive 2026-13 has discontinued the height and weight screening tables for Soldiers and cadets. The only standard is a waist-to-height ratio below 0.55. The old AR 600-9 table is kept above, closed, for reference.
What is the maximum waist for a 6-foot Soldier?
39.5 inches. At 72 inches, a 39.5-inch waist gives 0.548, under the line; 40 inches gives 0.555, which does not meet it. See the 72-inch row.
Are the standards different for women?
No. Women and men use the same table and the same line at every age. Only the measuring has its own rules: a Soldier of the same sex where possible, and the clothing options in Annex A.
Is the waist-to-height ratio the same as body fat percentage?
No. It is waist divided by height, a plain ratio that the Army does not convert into a percentage. The tape test and other body fat estimates are no longer used for Soldiers.
Where is the official chart?
Figure B-1 of Annex A to EXORD 182-26, titled “Maximum Waist Height Ratio Screening Table”. The table on this page holds the same 72 rows, and the ratio is recorded on DA Form 5500. Both are listed under Sources.